Diy Vaporizer Videos

Diy Rc Vaporizer 11.5.1

Same vaporizer as before. outside temperature 3 c, brrrrrrrrrrr. i think in summer it will make a bit more fog. sorry for the driving failures. i am a bit rusty and its pretty hard to steer with frozen fingers

Magic Flight Launch Box Vaporizer Test,homemade

I just made this video to show that it works and how fast it heats up,im trying to show the perspex misting up off the vapor them sucking through then letting it mist again but im only using a camera phone and its not very clear.its amazing how little stuff you need to get the desired effect,about a...

Diy Vaporizer Rc 8

Sorry for the poor quality, had to film with my mphone. this time the oxidation was nearly perfect. r 4ohm. but burned the head once again . the heating was not even enought.

Diy Vaporizer Rc 4

New vaporizer concept based on stainless steel wool.

Diy Vaporizer 11.5 Stitching The Head

This is how i stitch the head using 3mm carbon tow. just do a half stich on each side. the rows must not ovelap. note carbon particles can cause cancer. dont be stupid like me wear a mask and glows.

Homemade Vaporizer Hit

Hit from my new homemade vaporizer. all i had was this fresh resin ball

Diy Vaporizer 11.5 Oxidizing The Stainless Steel Mesh

This is how i oxidizide the mesh. cut a piece of mesh roll a tube repeat 3 or more times burn it till it glows put it into water

Diy Vaporizer Rc 6

Almost the same vaporizer as 5. this time a bit smaller, r 5ohm almost the same. now at 3s a123 fepo d. p 19w.

Diy Vaporizer Rc 9

To prevent burning i am using two vaporizers in series. each one with 2.5ohm. no burning, no spaks but a bit less fog.

How To Make A Homemade Lightbulb Vaporizer Free Hd

Vaporizer.org the lightbulb vaporizer has been a long standing friend to medical marijuana patients around the world with a few common household items you can have your own home made vaporizer that actually works great the lightbulb vaporizer doesn't require the exact tools listed here, but these ...

Homemade Vaporizer

This my homemade vaporizer, its made of plywood margarita glass, and plastic pipe

Shade Chylde's Diy Vaporizer V2.0 Smokin Design...

A new spin on the j man's original design, hopefully a sleeker 2.0 model...

Diy Vaporizer Rc 7

This time with a custom build fancase and a 25ml tank for the fluid mounted on an mi3 chassis. r 1,3ohm p 80w . something gone wrong on oxidizing the webbing . burned the vaporizer in the last seconds.

Preparing Bulb For Diy Vaporizer

This is part of a post that is on stonedworld.net. please go to the original post for full details. stonedworld.net

Using The Diy Vaporizer Pt 2

Using the vaporizer from article on stonedworld.net